Welcome to the new AirwaySim site

Started by Sami, April 25, 2024, 11:26:48 AM

Wreck

Quote from: Todorojoz on May 03, 2024, 09:10:29 PMThe new UI took some time to adjust too. There are a couple extra clicks here and there.

I guess you haven't had a change of base yet & had to adjust cargo or unblock seats on a 7 day schedule.
Losing filter settings on a screen refresh is more than a couple of clicks.

spiff23

I'm not really sure where to post this, but on iPad latest OS/Safari... the base fuel supplier option is stuck only on your initial HQ, you can't pull the screen to find any off view pull down with your other bases.  You can't click anything to make it come up.   You can see it on PC and it's way over to the upper right...but nothing on iPad.  You need both to be able to play if you have more than base and get a fuel supplier at each one. 

Seems like IOS issue asking around.

I'm adjusting, but that's the #1 issue I still see outstanding that requires multiple devices to continue playing and not doable if your main device is an iPad.

Sami

Quote from: spiff23 on May 06, 2024, 11:33:10 PMI'm not really sure where to post this, but on iPad latest OS/Safari... the base fuel supplier option is stuck only on your initial HQ

On my iPad I can see the "base airports" dropdown normally at the Fuel Supplier Contracts area top right-hand corner. (?)


p.s. all issue reports should go here: https://feedback.airwaysim.com/

spiff23

Thanks! It's now fixed / drop down showing and I registered for new site.

stevojh

When using my mobile there's no filter options when on the used aircraft page. Makes it very annoying having to scroll through page after page.

Sami

Quote from: stevojh on May 08, 2024, 06:29:56 AMWhen using my mobile there's no filter options when on the used aircraft page. Makes it very annoying having to scroll through page after page.

Yes there is, click on the three-dots icon at the top.

(And also read the FAQ: https://manual.airwaysim.com/simulation-documentation/faq-new-user-interface )

Sami

Quote from: [ATA] ChrisMcclean on April 26, 2024, 05:46:38 AMAlso the go back button dont work well. You allways have to set filters again and again for example if you check Maintainces of a spezial fleettype.

This was reported only a few days ago through the feedback site (so I missed to follow up on this comment). But it's now improved.