AirwaySim

Miscellaneous => Archives => Archived Feature requests => Topic started by: 11Air on July 26, 2017, 03:36:31 PM

Title: [-] Used same No or Letter to show Aircraft Size, Airport Size and Base Size
Post by: 11Air on July 26, 2017, 03:36:31 PM
I really want to know if my new aircraft can LAND and Operate out of the base I select.
If the same numbers/letters were used to classify Aircraft Size, Airport Size and Base Size that would be a very considerable help.
It may be necessary to roughly correlate with 2 digits in Aircraft requires Runway length for example though I would hope that an identifying code on an aircraft of 3,3,3 would define it as medium (3) runway, medium (3) airport, medium (3) Base required.
Hope it's correct to raise this as a Bug report, I've picked and hoped a few times. Usually when introducing bigger aircraft to my fleet. Bumping up a Base is fine, moving operations to a bigger runway/terminal isn't so easy.