AirwaySim

General forums => General forum => Topic started by: theguv316 on February 11, 2010, 09:24:55 PM

Title: how do you add a pic to a press release
Post by: theguv316 on February 11, 2010, 09:24:55 PM
help ! ! !
Title: Re: how do you add a pic to a press release
Post by: ICEcoldair881 on February 12, 2010, 12:26:11 AM
click on either of these:

"Insert Image" or "Insert Hyberlink". it's just above the smileys on the left hand side. if you reply to this post (just click reply ::) ) it will be there. it's exactly identicle to the one you use to make a press release because it is done through the forum. ;)

Insert Image is if you have a direct link to a pic posted to a site, and Insert Hyberlink is if it's a link to a site with the pic. you can also click on "Additional Options" which is just below the reply box, a little more to the left side of the page. click on that and you can attach the pic if it's a file on your computer. it can only be a gif, png or jpeg file (basically you will see the file as file1.jpeg or file235.png etc.) which has a limit of 10 photos per post and they cannot exceed 200KB (each). Hope that helps. ;)

Cheers,
ICEcold
Title: Re: how do you add a pic to a press release
Post by: theguv316 on February 13, 2010, 05:20:54 PM
(http://)
Title: Re: how do you add a pic to a press release
Post by: theguv316 on February 13, 2010, 05:21:10 PM
cheers