AirwaySim
Online Airline Management Simulation
Login
Username
Password
 
or login using:
 
My Account
Username:
E-mail:
Edit account
» Achievements
» Logout
Game Credits
Credit balance: 0 Cr
Buy credits
» Credit history
» Credits FAQ

Author Topic: [-] cabin crew always needed?  (Read 232 times)

Offline meiru

  • Members
  • Posts: 745
[-] cabin crew always needed?
« on: December 19, 2013, 12:28:30 AM »
what I did

1) create new flight and assign to aircraft
2) -> because it needs more staff, hire them
3) remove the flight from the aircraft
4) go to staff page -> numbers of "needed staff" went down again, but not for cabin crew... why?
« Last Edit: December 19, 2013, 12:37:45 PM by sami »

Offline Sami

  • Administrator
  • Members
  • Posts: 15028
    • AirwaySim - Are you the next Richard Branson?
Re: cabin crew always needed?
« Reply #1 on: December 19, 2013, 12:37:38 PM »
Yes, the calculation method is the same for pilots and cabin here, where as rest of the staff is calculated differently. Flight crew requirement is calculated based on the assumption that you are operating a "full" schedule for each plane, since otherwise any minor changes in the schedule would cause unnecessary and continuous small adjustments in these numbers.   (however of course if you have zero flights for a plane there is no staff requirement either)

=> not a bug, but intentional

Offline meiru

  • Members
  • Posts: 745
Re: [-] cabin crew always needed?
« Reply #2 on: December 19, 2013, 01:31:09 PM »
... sorry, I should correct point 3) -> remove ALL flights from the aircraft (also a/b-checks)

Offline Sami

  • Administrator
  • Members
  • Posts: 15028
    • AirwaySim - Are you the next Richard Branson?
Re: [-] cabin crew always needed?
« Reply #3 on: December 19, 2013, 02:04:52 PM »
Tested:

No flights to this a/c: cabin req 120
Assigned some flights to it: cabin req 150
Cleared schedule: cabin req 120

-ok

 

WARNING! This website is not compatible with the old version of Internet Explorer you are using.

If you are using the latest version please turn OFF the compatibility mode.