AirwaySim
Online Airline Management Simulation
Login
Username
Password
 
or login using:
 
My Account
Username:
E-mail:
Edit account
» Achievements
» Logout
Game Credits
Credit balance: 0 Cr
Buy credits
» Credit history
» Credits FAQ

Author Topic: [ok] Range / Capacity  (Read 219 times)

Offline JumboShrimp

  • Members
  • Posts: 5992
[ok] Range / Capacity
« on: July 15, 2015, 06:09:58 AM »
I have an aircraft 738, standard MTOW configured for 160 pax, and the system informs me that the range (at full capacity) is 1,880 nm.

I schedule this aircraft on a route that is 1,879 nm, less than max by 1 nm.  (ESB-OPO).

When I look at the route planning page (GW3):
http://www.airwaysim.com/game/Routes/Planning/LTAC/LPPR/?go=1

it shows capacity of 159 pax (rather than full 160).  The runway seems long enough on both ends.
« Last Edit: August 05, 2015, 06:17:09 PM by sami »

Online gazzz0x2z

  • Members
  • Posts: 1393
Re: Range / Capacity
« Reply #1 on: July 15, 2015, 05:54:48 PM »
wind?

Offline JumboShrimp

  • Members
  • Posts: 5992
Re: Range / Capacity
« Reply #2 on: July 15, 2015, 06:30:27 PM »
It's an East-West flight, and the flight time is different (30 minute difference).  But the capacity is 159 (-1) in both directions.

Now that you bring it up, I seem to recall that the system used to (in the past) take the flight time into account, and when at the limit, it would limit the capacity flying West, but not flying East.  I seem to recall that on some routes, I could skip the tech stop one way, but included it the other way...

Back before the tech stops were completely crippled...

 

WARNING! This website is not compatible with the old version of Internet Explorer you are using.

If you are using the latest version please turn OFF the compatibility mode.