AirwaySim
Online Airline Management Simulation
Login
Username
Password
 
or login using:
 
My Account
Username:
E-mail:
Edit account
» Achievements
» Logout
Game Credits
Credit balance: 0 Cr
Buy credits
» Credit history
» Credits FAQ

Author Topic: Fallen Load Factor  (Read 1038 times)

Bill Miller

  • Former member
Fallen Load Factor
« on: December 27, 2011, 07:35:48 AM »
Hello,

I have been achieving a 75 plus LF on one of my routes which I fly 4 times daily and it has just suddenly fallen to 35 in the last 7 days. I can't seem to figure out why. Any advice?

Thanks

Bill

Offline Sanabas

  • Members
  • Posts: 2161
Re: Fallen Load Factor
« Reply #1 on: December 27, 2011, 07:46:38 AM »
A sudden spike like that might be due to new competition, but it's most likely because you added a new flight on that route, and now have 2 flights too close together (i.e. less than 1 hour gap on everything but very busy routes).

Bill Miller

  • Former member
Re: Fallen Load Factor
« Reply #2 on: December 27, 2011, 03:34:39 PM »
Thanks. Is it possible to see if someone else is operating the same route as my airline and if so how?

Regards

Bill

Offline alexgv1

  • Members
  • Posts: 2184
Re: Fallen Load Factor
« Reply #3 on: December 27, 2011, 04:27:45 PM »
Route planning page has the flights from all airlines listed at the bottom.
CEO of South Where Airlines (SWA|WH)

Bill Miller

  • Former member
Re: Fallen Load Factor
« Reply #4 on: December 27, 2011, 09:14:45 PM »
Thanks

Bill Miller

  • Former member
Re: Fallen Load Factor
« Reply #5 on: December 27, 2011, 09:17:25 PM »
You were right! Someone else has started flying the same route. Thanks again.

Bill

Offline alexgv1

  • Members
  • Posts: 2184
Re: Fallen Load Factor
« Reply #6 on: December 27, 2011, 09:29:08 PM »
Glad to be of help  :) competition makes big difference on load factors especially if it is effective (frequency/small aircraft bonus)
CEO of South Where Airlines (SWA|WH)

 

WARNING! This website is not compatible with the old version of Internet Explorer you are using.

If you are using the latest version please turn OFF the compatibility mode.